Doc.-ID: 180516-PT10BA-ES-RoughCam IPM1145-(L)_en_rev.01.docx, page 32 of 40
6.2
Assigning the IP address
The RoughCam IPM1145-(L) is an Ethernet network camera requiring an IP address to
access it. Usually a DHCP server is integrated in most networks which automatically as-
signs an IP address. In case there is no DHCP server available in the network, the
RoughCam IPM1145-
(L)’s default address “192.168.0.90” (subnet masking
255.255.255.0) is used.
With the “AXIS IP Utility“, it is possible to determine the IP ad-
dress under Windows; the included USB stick contains this application. It is also available
for download:
http://www.samcon.eu/downloads-ex-videokameras-atex/download-treiber-software/
In case it is not possible to assign the IP address, it might be necessary
to change the firewall settings or t consult the network administrator!
The “AXIS IP Utility“ tool automatically recognizes all RoughCam devices and displays
them (also applies to the subnet). It can also be used to manually assign a static IP ad-
dress. Please note that the RoughCam IPM1145-(L) network camera has to be installed
within the same network segment (physical subnet) as the computer on which
the “AXIS
IP Utility” tool is executed.
For example, the RoughCam IPM1145 has the following default network marking:
„AXIS
M1145
– ACCC8E3A4EBB“ (q.v. figure 6.1). MAC address and serial number are also
determined and displayed so that a non-ambiguous identification is possible. The net-
work name (host name) of the network camera (web server) can be changed as desired
by the user (max. 64 characters).
Figure 6.1
– Axis IP Utility
RoughCam IPM1145
RoughCam IPQ6045
