46
KWT, CAMEL, KOLIBER, KW, LAMA
REAR EXTENSION ARMS
OPERATOR’S MANUAL
4
3
2
1
6.
MOUNTING AND ADJUSTMENTS
6.1.
Mounting and dismounting flail head
❑
Mounting flail head on extension arm is performed with use of multi-purpose linkage with mounting
catch (
2
) (
❑
Prepare flail head (
1
), which first should be dismounted
–
using support foot (
4
) set the head
parallel to the ground.
❑
Place the machine on level ground.
❑
Lift extension arm and drive tractor away.
❑
Drive the tractor and position extension arm so it is possible to attach a head.
❑
Turn the tractor's engine off and take ignition key out.
❑
Screw bolts in mounting catch (
2
) and connect quick fasteners (
3
). For
LAMA 120 P
head, connect
2 cables for rotation control of the moving part of ejector directly to push-in fittings of tractor's
hydraulics.
Fig. 47.
Mounting flail head with use of multi-purpose linkage
In order to dismount flail head take analogical steps, that is place machine on even ground and
disconnect tractor’s engine. Then unscrew bolts in mounting catch (
2
) and disconnect quick fasteners
(
3
) (
NOTE:
The arm is equipped with set of twist-on push-in fittings designed for quick mounting and
dismounting of the cutterbar or working adapters
.
6.2.
Mounting flail heads
Coupling
LAMA
121/ 141
mowing heads is significantly facilitated owing to application of
mountings. Mountings such as: basic mounting (
, item 1), rotary mounting (item 2), hydraulic
turntable (item 3) are normally bolted to extension arm with 6 bolts.
Hydraulic turntable can be attached to mowing heads.