SaMASZ KW 141, Operator'S Manual

Page: 35 / 72

35
OPERATOR’S MANUAL REAR EXTENSION ARMS KWT, CAMEL, KOLIBER, KW, LAMA
NOTE:
If necessary , shorten the PTO shaft according to its operator's manual given by the shaft’s
manufacturer ( Fig. 28 ).
.
Fig. 28. Instruction of PTO shaft shortening
CAUTION!
The articulated telescopic shaft should remain connected only during machine
operation. During transport or any servicing operations the shaft should be
disconnected from the PTO of the tractor.
CAUTION!
Use machines with PTO shafts designed to drive them. Prior to the work
commencement, safety guards should be checked whether they (in the tractor,
the machine and the PTO shaft) are placed correctly and not damaged.
Damaged or missing parts must be replaced with genuine ones. Make sure
whether the PTO shaft is properly mounted. Approaching the rotating parts is
strictly forbidden, as it may lead to serious injuries or even death. For any service
and repair works of the shaft and the machine, the tractor engine and its drive
must be disconnected Prior to the operation commencement, read
the operator's manuals of both the machine and the PTO shaft.
NOTE:
PTO shaft’s end with friction clutch should be mounted at the machine ’s side.
5.2. Preparing machine for transport
Control panel should be installed in tractor’s cabin. Tractor operating on public road should be
equipped with yellow flashing light and warning triangle ( Fig. 29 ).
NOTE:
For transport set the arm KWT 651 with working head as farthest behind the tractor as possible
( Fig. 29 ).