SaMASZ KW 141, Operator'S Manual

Page: 40 / 72

40
KWT, CAMEL, KOLIBER, KW, LAMA REAR EXTENSION ARMS OPERATOR’S MANUAL
Fig. 38. Working position for KWT 651
CAUTION!
When maneuvering the operating head pay attention so as not to hit it against
a tractor or the extension arm (
Fig. 39 ).
Fig. 39. Risk of head collision with tractor or extension arm
5.4.3. Operating control panel
Tilting with the machine's arms is performed with use of hydraulic cylinders controlled from
control panel located in the tractor's cabin. On the panel there is the machine diagram placed with
numbering of each cylinder (
Fig. 40 ) and corresponding control levers.
WARNING!
Minimum bending radius of cords of control panel is 7.9 in / 20 cm. The cords
set with lower radius will break.