SaMASZ KW 141, Operator'S Manual

Page: 36 / 72

36
KWT, CAMEL, KOLIBER, KW, LAMA REAR EXTENSION ARMS OPERATOR’S MANUAL
Fig. 29. Arm in transport position – a) KWT 550 , b) KWT 651 .
Placing warning plate and lights on the machine
The arm is connected to tractors on rear 3-point linkage. Machine driving on public road must be
in transport position ( Fig. 29 ) and hold proper marking. Transport position is when flail head is set
nearest possible to tractor’s axis (width is minimal). Inner extension arm (cylinder S ) is protected
against hydraulics failure – with special rupture valve ( Fig. 30 ) – ( A ) and additionally with oil flow
regulator ( Fig. 30 ) – ( B ). For transport time cylinder rod should additionally be protected with channel
lock. Moreover the tractor must be equipped with warning triangle, as well as yellow flashing light
mounted on the cabin's roof (at street side). Warning plate with white and red stripes equipped with a
light on right side should also be mounted.
Fig. 30. Actuator hydraulic lock and choke valve
in extension arms KWT 550/650 , CAMEL 900 , KOLIBER 400/450
NOTE:
For transportation of outrigger close valve ( Z ) ( Fig. 31 ) – applies to:
KWT 550 E, KWT 650 E, KWT 651E .
max.
4
m
max.
4
m
a) b)
A
B
S