28
KWT, CAMEL, KOLIBER, KW, LAMA
REAR EXTENSION ARMS
OPERATOR’S MANUAL
Tab. 7.
Location of centre of gravity for mowing heads
Dimension
[mm]
Type of mowing head
KW 110
KW 111
KW 125
KW 126
KW 140
KW 141
A
780
605
870
670
980
780
B
280
300
280
300
280
275
C
480
520
480
520
480
520
Dimension
[mm]
Type of mowing head
LAMA
101 P
LAMA
120
LAMA
121
LAMA
121 HD
LAMA
140
LAMA
141
A
590
800
660
690
890
760
B
360
240
340
350
240
340
C
500
400
540
490
400
540
4.5.
Working parts
❑
Prior to operating the machine check flail knives condition.
❑
Worn or damaged knives should be replaced immediately with new ones.
❑
In case of excessive machine vibrations during operation, the flail shaft should be balanced.
CAUTION!
During replacement of working parts, it should be used personal protective
gloves.
4.6.
PTO shaft
❑
Before operating learn provisions found in bar manufacturer's manual placed on the bar.
❑
PTO shafts recommended by the machine's manufacturer shall only be used.
❑
In order to operate safely use only fully technically fit, undamaged PTO shafts. Damaged PTO shaft
shall be repaired or replaced with new one.
❑
Before any operation make sure whether PTO rpm have proper rotational direction.
4.7.
Hydraulic assembly
❑
Elastic hydraulic hoses should be checked regularly and if any damage occurs or they expire,
replace with new ones. Replaced hoses must conform with the manufacturer's technical
requirements.
❑
Prior to performing service works at hydraulics the tractor's engine should be stopped and ignition
key taken out.
❑
It is not acceptable to adjust sweep valves on factory set distributors.
❑
Do not drain oil onto the ground, to the sewage system, into rivers or lakes. Only tight tanks should
be used for temporal storing of used oils.
❑
Used oils contain substances harmful for the natural environment and should be delivered to
a proper used oil treatment plant.
