SaMASZ KW 141, Operator'S Manual

Page: 19 / 72

19
OPERATOR’S MANUAL REAR EXTENSION ARMS KWT, CAMEL, KOLIBER, KW, LAMA
3.2.3. Mounting mowing heads
LAMA 121(HD)/141 and KW 111/126/141 heads are attached to an extension arm with a
standard single or 4 optional types of fittings available, which enable different manners of mounting
the head (
Fig. 19 ).
Fittings are of the following types:
1. The basic is a rigid fitting, simple and light, attached to an extension arm with 6 screws M14
(SaMASZ-standard).
2. Swivel fitting, mounted with 6 screws M14 (SaMASZ-standard) to an extension arm, enables the
head to be swivelled every 15° in 4 positions.
3. Swivel push-in fitting, enabling quick coupling/releasing of the head to/from the extension arm and
allowing the head to be swivelled every 15° in 4 posit ions.
4. Mounting for ground-following linkage, connected to extension arm with 6 bolts M14.
5. Mowing head ground-following linkage. Extension for mechanical ground following with 260mm
travel. Mounted on extension arm with 6 bolts M14 (SaMASZ standard).
Fig. 19. Types of head mountings LAMA 121/141 and KW 111/126/141 :
1 - Fixed mounting, 2 – Rotary mounting, 3 – Hydraulic turntable,
4 – Mounting ground following linkage, 5 – Mowing head ground-following linkage
1
2
3
4
5