116 • Service Mode Programming
SAM4S NR-500 Series Manual
Use the PC Utility to Convert the Image
See page on 107 for detail.
Copy the Images to an USB memory
The PC Utility will create two image files:
USERPRE.IMG
USERPOST.IMG
They will be located in your PC at:
C:\Users\[Computer name]\Documents\eSpresso\[Store name]\[Register name]
Copy the mages to the following path on your USB memory:
USB\\NR-500\Storename\IMAGE
Important: In the path: C:\Users\[Computer name]\Documents\eSpresso\[Store
name]\[Register name], the store name and register name are the names you have
defined as the store in the SAM4s PC Utility.
Note: You must use the same store name in the NR-500 Series ECR at “Store name”
of “SYSTEM” of the “Options Programming” Note that the default store name is
“STORE001”.
Saving Images from an NR-500 Series to an USB memory
7.
Insert the SD card in the register’s USB slot.
8.
Move to the
SERVICE MODE
.
9.
From the Service Mode menu, select “
7.PROGRAM BACKUP
”.
10.
From the PROGRAM BACKUP menu select “
2.USB
”.
11.
From the USB menu select “
4.IMAGE SAVE
”.
12.
The message “SUCCESS !” will display on the LCD.
Loading the Images by USB memory
7.
Insert the SD card in the register’s USB slot.
8.
Move to the
SERVICE MODE
.
9.
From the Service Mode menu, select “
7.PROGRAM BACKUP
”.
10.
From the PROGRAM BACKUP menu select “
2.USB
”.
11.
From the USB menu select “
5.IMAGE LOAD
”.
12.
The message “SUCCESS !” will display on the LCD.
