SAM4S NR-500 Series Manual
Program Mode Programming • 173
Option Entry
Description
SEND RESET REPORT
TO E.J
Y or N
If the electronic journal is enabled above,
select
Y
if you wish to capture reset reports.
E.J PRINTING
NEW
OLD
NEW
: Prints electronic journal from lowest
consecutive number to highest.
OLD
: Prints electronic journal from highest
consecutive number to lowest.
E.J PORT
0-2
Choose a port for a remote printer to print
electronic journal reports instead of the
register printer.
PRINT SMALL FONT
EJ REPORT
Y or N
Select
Y
to print small font on EJ report.
SAVE EJ TO SD
NONE
EVERY TIME
ONCE AFTER Z
REPORT
Store electronic journal data to the sd card.
Select “EVERY TIME” to store at every sale.
Select “Once after z report” to store only after
z report.
If you don’t want to store electronic journal
data to the sd card, select “NONE”.
TRAIN MODE options
Option Entry
Description
OPEN DRAWER IN
TRAIN MODE
Y or N
Select
N
if you do not want the cash drawer to open
during training mode operations.
PRINT TRAIN MODE
TITLE
Y or N
When in training mode, the message "TRAIN
MODE" normally prints on each receipt. Select
N
if
you wish to delete this message.
SEND TO KP IN
TRAIN MODE
Y or N
You can choose whether to print or not print
registrations in training mode on kitchen requisitions.
PRINT JOURNAL IN
TRAIN MODE
Y or N
Select
Y
to print on the detail printer in train mode.
TRAIN P/W
6 DIGIT
If you wish to use training mode, you must program a
password that you will use to enter training mode.
The password may be up to 6 digits.
PRT TRAIN CLERK
START/END MESSAGE
Y or N
Select N if you do not wish to print a message of train
clerk start or end.
