SAM4S NR-500 Series Manual
Operations • 33
SERVICE
Use to temporarily finalize Previous Balance or check tracking transactions.
SUBTOTAL
Displays subtotal of sale including tax. Must be pressed prior to a sale
discount or sale surcharge.
TABLE
You can enforce the entry of a table number for guest check transactions, or
for all transactions. If you are tracking guest check balances, the balance
can be recalled either by entering the check number or the table number.
TARE
Tares are continer weights. If you are using the scale function, you can preset
up to 5 different tare weights. The tare can be subtracted automatically when
a specific PLU is registered, or the tare can be subtracted by manually
inputting the tare number and pressing the
TARE
key. Tare #5 can be
programmed for entering tare weights manully.
TAX EXEMPT
Press the
TAX
EXEMPT
key to exempt tax 1, tax 2, tax 3, and/or tax 4 from
the entire sale.
TAX SHIFT (1-4)
When pressed before a PLU entry, the tax shift keys reverse the tax status of
the PLU, i.e., a PLU with non-tax status would become taxable or a PLU with
tax status would become non-taxable.
TIP
The
TIP
key allows a gratuity to be added to a guest check before payment.
The tip amount is deducted from the Cash-in-Drawer amount for the
Clerk/Cashier closing the guest check.
The
TIP
key may be programmed as either a percentage or amount. If
programmed as a percentage, tax programming defines whether the
percentage is calculated on the net amount, or the amount after taxes.
VOID
Use to correct an item entered earlier within a sale. The
VOID
key corrects
the appropriate totals and counters. To correct the last item, use the
ERROR
CORR
key. For void operations outside of a sale (Transaction
Void), use the
VOID MODE
. The Financial report records totals for each
type of void separately.
WASTE
Allows control of inventory by accounting for items that must be removed
from stock due to spoilage, breakage or mistakes. Press the
WASTE
key
before entering wasted items, and then press the
WASTE
key again to
finalize. The
WASTE
key may be under manager control, requiring the
mode to be in the MANAGER MODE. The
WASTE
key is not allowed
within a sale.
VALIDATION
Press to intiate a single line validation. Note that an optional printer with
validation capability must be attaced to the NR-500 and identified.
