background image

 

22  •  Operations 

ER-5215M Electronic Cash Register v2.23 

Keyboard Legend 

Description 

PRINT CHECK 

Use to print a guest check.  The check can be printed on an optional (RS-

232C) printer, or can be printed on the receipt printer.  The 

PRINT 

CHECK

 key can be set to automatically service the check. 

PROMO 

The 

PROMO

 key allows you to account for promotional items, as in "buy 

two, get one free".  Pressing this key will remove an item's cost from the 

sale, but will include the sale of the item in the item's sales counter.   

RECT FEED  

Advances the receipt paper one line, or continuously until the key is 

released.  

RCPT ON/OFF  

When 'OFF' no receipt will print during a sale.  (If the receipt is off, a 

buffered receipt is available by pressing the

 

CASH

 key a second time.) 

RECD ACCT (1-3) 

The 

RA

 (received on account) key is used to record media loaned to the 

cash drawer, or payments received outside of a sale.  The cash drawer will 

open.  The amount received adds to the cash-in-drawer total. 

SCALE 

Use to make weight entries.  When a scale is attached, press the scale key 

to show the weight in the display, then press (or enter) a PLU to multiply 

the weight times the price.  When a scale is not attached, you can enter the 

weight (using the decimal key for fractions).  PLUs may be programmed to 

require an entry through the scale key.   

SERVICE 

Use to temporarily finalize Previous Balance or Check/Table tracking 

transactions.    

SBTL 

Displays subtotal of sale including tax.  Must be pressed prior to a sale 

discount or sale surcharge.  

TABLE # 

Tracks the current balance for a guest check or table.   

TARE 

Tares are container weights.  If you are using the scale function, you can 

preset up to 5 different tare weights.  The tare can be subtracted 

automatically when a specific PLU is registered, or manually inputting the 

tare number and pressing the TARE key can subtract the tare.  Tare #5 can 

be programmed for entering tare weights manually. 

TAX EXEMPT 

Press the 

TAX EXEMPT

 key to exempt tax 1, tax 2, tax 3, and/or tax 4 

from the entire sale.  

TAX (1-4) SHIFT 

When pressed before a PLU entry, the tax shift keys reverse the tax status 

of the PLU, i.e., a PLU with non-tax status would become taxable or a 

PLU with tax status would become non-taxable. 

TIP 

The 

TIP

 key allows a gratuity to be added to a guest check before 

payment.     
The 

TIP

 key may be programmed as either a percentage or amount.  If 

programmed as a percentage, tax programming defines whether the 

percentage is calculated on the net amount, or the amount after taxes. 

VOID 

Use to correct an item entered earlier within a sale.  The 

VOID

 key 

corrects the appropriate totals and counters.  To correct the last item, use 

the 

ERROR CORR

 key.  For void operations outside of a sale 

(Transaction Void), use the 

VOID

 position on the control lock.  The 

Financial report records totals for each type of void separately. 

VALIDATION 

If you are using an optional slip printer, you can press the 

VALIDATION

 

key to print a three-line validation on a separate form or piece of paper.  

Any item registration, discount or payment may be validated  

Summary of Contents for ER-5215M



































































































































































































Reviews: