148 • P-Mode Programming
ER-5215M Electronic Cash Register v2.23
Group Programming
20 Group totals are available to accumulate totals of individual PLUs that are assigned to each group.
Each PLU can be assigned to one, two or three different groups. (See “Program 150 - PLU Group
Assignment” on page 100 to program PLU groups for each PLU.)
Use program 900 to assign a group status, i.e. a group can be set to
not add
to the total of
all groups, or a group can be used to designate like items for kitchen printer assignment.
Use program 910 to assign a unique descriptor for each group, so that the group may be
easily understood on the group report.
Programming Group Status - Program 900
1.
Turn the control lock to the
P
position.
2.
To begin the program, enter
9
0
0
, press the
SBTL
key.
3.
Enter the number (
1
-
99
) of the group you wish to program; press the
X/TIME
key.
4.
Enter an option digit from the table below, press the
SBTL
key.
Address
OPTION
VALUE
=
SUM
Group total is added to the total of all
groups on the Group report?
Yes = 0
No = 1
N1
Send to kitchen printer?
Yes = 2
No = 0
No Choice
0
KP PORT# : R(requisition on the register
receipt)
1
KP PORT#: 1
2
N2
KP PORT#: 2
4
N3
Print RED on KP?
Yes = 1
No = 0
N4
Gift Card:
None = 0
Activate = 1
Add = 2
5.
To program additional groups, repeat from step 3, or press the
CASH
key to finalize the
program.
9
0
0
SBTL
X/TIME
CASH
N2
N3
N4
SBTL
N1
