Sirius 830 Installation Manual
www.s-a-m.com
Workbench
Issue 2 Rev 2
Page 67
© 2016 SAM
11.5.1 Configuration Using the Workbench Configuration Screens
The Workbench configuration screens are used to view and edit the router control module
configuration settings (see Fig 48.)
To configure the router control module from the Workbench configuration screens:
1.
Click on the
Routers
tab from the Controller Configuration screen. The Routers tab
shows the currently configured router matrices, buttons for basic configuration
settings and a button to open the advanced configuration options.
2.
Make any changes required using the menu buttons and click the
Close
button.
3.
Any configuration changes must be pushed from the Workbench computer to the
router control module. See section for 11.5.4 details.
Fig 48. Router Configuration (Nucleus2 2463 Shown)
Note:
In the example shown in Fig 48. the router control module is configured with a video matrix
(S830V) and an audio matrix (S830A).
Summary of Contents for Sirius 830
