Sam Sirius 830, Installation And Quick Start Manual

Page: 63 / 72

Sirius 830 Installation Manual www.s-a-m.com Workbench
Issue 2 Rev 2 Page 63 © 2016 SAM
5. When the controller type and setup type have been selected click the Next button.
6. Enter the Name, IP address and IP Port for the main controller and, if the router
contains two router control modules, tick the Create Pair checkbox.
Name - Enter the controller name to be displayed by Workbench
IP Address - Edit the controller IP address to match the main router control module.
IP Port - Enter the controller IP port address, this is usually 2007
Create Pair - Tick the Create Pair checkbox to enter details of the second router
control module if one is fitted.
Workbench automatically sets the IP address to be xxx.xxx.xxx.xx+1
where xxx.xxx.xxx.xxx = main controller IP address.
Fig 43. Controller Wizard Network Configuration Screen