Sam Sirius 830, Installation And Quick Start Manual

Page: 29 / 72

Sirius 830 Installation Manual www.s-a-m.com Cabling
Issue 2 Rev 2 Page 29 © 2016 SAM
7. Cabling
7.1 Earthing
For full details on the earthing requirements please see section 2.7.
7.2 Cable Management
See Section 2.5 for details on cable management.
7.3 Mains Power Cables
For full details on the mains cable requirements please see section 3.4.3.
PowerCon Wiring :
• Cable outside diameter: 17 mm (general range: 8.0 to 20.0 mm)
• Cable Connector: Screw-type terminals for stranded wires up to 6.0 mm
2
(AWG 10)
Cables connected to the router must be fitted with adequate vertical and horizontal strain
relief to avoid twisting of the rear panels causing damage to the router connectors and loss
of electrical/signal connection to the router.
1. The following PowerCon connector wiring instructions MUST be followed.
2. The AC supply feed MUST be isolated before connecting or disconnecting the
“PowerCon” connectors. This is required because the “PowerCon” connectors are
not suitable for isolating current.
3. The mains conductor colors for Live, Neutral and Earth in Fig 14. are only
examples and may not match the colors used in your geographical location.
Fig 14. Cable Connector Assembly instructions