EN
37
RE-ASSEMBLE THE AUXILIARY, SEMI-RAPID AND TRIPLE-CROWN BURNERS AS FOLLOWS
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
7
1
2
3
4
8
5
9
6
7
1
2
3
4
8
5
9
6
Triple-Crown burners
Auxiliary,Semi-rapid
FOR THE TRIPLE-CROWN BURNERS:
1. Place the circle burner cap (2) and burner
lid(1) on the flame spreader (3) in tu
2. Place the flame spreader(5) onto the burner
cup (6) and place the burner lid(4) on the
flame spreader (5).
3. Position the flame spreader (3) onto the
burner lid (4).
FOR THE AUXILIARY,SEMI-RAPID:
1. Place the flame spreader (8) onto the
burner cup (9) so that the ignition device
and the flame supervision device extend
through their respective holes in the flame
spreader.
2. Position the burner lid (7) onto the flame
spreader (8) ,so that the retaining pins fit
into their respective recesses.
REPLACE PARTS IN THE CORRECT ORDER AFTER CLEANING.
Do not mix up the top and bottom.
The locating pins must fit exactly into the
notches.
Summary of Contents for Masterchef Line Executive PSC-VH-1060
Page 42: ...N O T E S 44 ...
