![background image](http://html1.mh-extra.com/html/salvis/profiline-2-flame-gas-hob/profiline-2-flame-gas-hob_operating-instructions-manual_804149040.webp)
en
40 / 72
9.2
Replace external nozzle, set primary air
Remove front panels, refer to page 45 Chapter 10.6!
Screw to attach sleeve
External
nozzle Nozzle holder
Set primary air = dimensions in mm
Primary air sleeve
Screw to attach nozzle holder
Screw to attach sleeve
.
Screw to attach the nozzle holder, only turn out as far until the nozzle holder can be removed.
.
Determine external nozzle, refer to information in the table, page 39 Chapter 9.1.2
.
Set primary air, refer to information in the table, page 39 Chapter 9.1.2
.
Apply heat-resistant securing lacquer on attachment screws and primary sleeve.
.
Check all gas-bearing parts for tightness.
9.3
Replace fine-adjustment nozzle
Remove front panels, refer to page 45 Chap
ter 10.6!
.
Determine fine-adjustment nozzle, refer to
page 39 Chapter 9.1.2
.
Screw in fine-adjustment nozzle up to the stop
position.
.
Set fine-adjustment nozzle (nozzle without drill
hole), refer to page 39 Chapter 9.1.2
.
Check all gas-bearing parts for tightness.
9.4
Replace pilot burner nozzle
Remove front panels, refer to page 45 Chap
ter 10.6!
.
Determine pilot burner nozzle, refer to
page 39 Chapter 9.1.2
.
Adjust correctly the pilot flame, by turning the
primary air sleeve, until the flame ist stable.
.
Check all gas-bearing parts for tightness.
with drill hole
Fine-ajustment
nozzle without drill
hole
Fine-adjustment nozzle
(bypass screw)
Pilot burner
nozzle
Pilot burner with
pilot burner cover
Locking
srew
Compres
sion spring
Cooking
hob
Natural
gas = 50 %
Hülse
Primärluft
Liquid gas =
100 %