en
37 / 72
9.
Switching to another type of gas
Observe the notes regarding safe operation, refer to page 28 Chapter 2.
DANGER! Risk of explosion!
.
Before assembly and conversion tasks, close the gas tap on the appliance and on
site!
.
Lock the on-site gas tap against unintentional opening!
.
Place a sign at the on-site gas tap to indicate that work is in progress on the gas
system!
● Only use original nozzles when switching to another type of gas.
.
After switching to another type of gas and after maintenance tasks:
−
Check all parts carrying gas for tightness (leak spray).
−
Install identification of the type of gas and gas supply pressure at the appliance.
.
Allocate and determine the nozzles and settings required, refer to the following chapter 9.1
