![background image](http://html.mh-extra.com/html/salvis/cucinaevo-1011qt/cucinaevo-1011qt_operation-instructions-manual_804156024.webp)
Operating Instructions
24 / 92
7
Auxiliary functions
Selecting auxiliary functions
.
Tap the required "Auxiliary Functions".
D
The key is shaded dark grey and framed.
.
Confirm the set auxiliary function with "Enter".
D
The "Settings" window will be displayed again.
D
The auxiliary functions set are displayed again in the
window.
Auxiliary functions window:
Ventilator speeds in five stages and cycled (T).
Select the desired ventilator speed by tapping the key several times until the desired ventilator
speed is displayed.
Eco Mode: Reduced heat output.
SDA
Safety steam extraction at the end of the cooking process.
Signal and message window, output after expiry of the cooking step, e.g. for basting, sea
soning or turning the food to be cooked. Has an effect on the signal, activated light signal and
external signals.
Start time/end of cooking preselection: Pre-select start or end of the cooking process.
Refer to the following figure regarding making the settings 8
Temp-Active: Preheating / Cooling before the cooking process
D
After a heating or cooling process the controller waits for an entry confirmation. Displayed
by blue symbol in the key "Start/Stop".
Application “Cooling of the cooking chamber with cooking chamber door open“ refer to page
20 chapter 5.7
!
The cooking time countdown starts only after
−
loading the cooking compartment, by opening and closing the door of the cooking compart
ment
or
−
after tapping the key "Start/Stop".
AQA
Automatic Quantity Adaptation (quantity recognition and cooking time adaptation).
Closing the auxiliary functions window without confirming the change (Cancel).
Confirm settings and close window.