Salvis CucinaEVO 1011QT Operation Instructions Manual Download

Page: 13 / 92

Operating Instructions

13 / 92

Commissioning

Before using the appliance for the first time, clean with a cleaning product that dissolves grease.

For cleaning, see page 71, Chapter 13.

Only for appliances with automatic cleaning system, not for Types 2011:

Before initial commissioning or after extended operating breaks, fill approx. 5 litres of water into the
cooking chamber drain (overheating protection/odour trap).

5.1

Getting ready for use

Check whether the cooking chamber is clean and free of cleaning agent residues.

5.1.1

Inserting the air filter

Set the air filter in the guide rails and push against the stop.

Air filter

Type 611, 621QT,

1011, 1021QT,

2011, 2021QT

Type 623 T,

611 T,

1011 T

Air filter on the
rear of the
appliance

5.1.2

Screwing on the water manifold (optional automatic cleaning system)

Only for appliances with automatic cleaning sys
tem!

Insert water manifold up in the cooking chamber
and fasten with by hand with knurled nut.

5.1.3

Inserting the air baffle

The device may not be operated without air baffle!

The device must be switched off during installation.

The air baffle may not be dismantled or mounted while the ventilator is still running!

Inserting the air baffle type 623T, 611T,

1011T

Air baffle

−

insert at the bottom into the two guide pins,

−

lean against the holder at the top,

−

use a screwdriver to close both locks by tur
ning them to the left.

Open/close locking mechanism:

−

Open by turning to the right,

−

Close by turning to the left.

In upper centre
of cooking
chamber

Knurled nut

Threaded bolt

Air baffle (at rear of cooking chamber)

Guide pin

Locking

Open

Closed

Summary of Contents for CucinaEVO 1011QT





























































































Search results

Summary of Contents for CucinaEVO 1011QT

Reviews:

Related manuals for CucinaEVO 1011QT

Brands by name

Popular brands

Salvis CucinaEVO 1011QT, Operation Instructions Manual

Search results

Summary of Contents for CucinaEVO 1011QT

Reviews:

Related manuals for CucinaEVO 1011QT

Brands by name

Popular brands