Tel: 886.2.2175 2930 Email: [email protected]
www.salukitec.com
44
6.19
Trace
Press [Trace] key on the front panel to pop up corresponding soft menu. Including: [Trace 1 2 3 4 5], [Clear Write], [Max. Hold],
[Min. Hold], [Bland], [View], [Detector], [Operation].
[Trace 1 2 3 4 5]
Menu description: to select trace. The signal/spectrum analyzer provides 5 trace lines Trace 1, Trace 2, Trace 3, Trace 4, Trace
5.
[Clear Write]
Menu description: to set the current trace processing as Clear Write, i.e., clear all data of displayed trace and continue the
signal trace receipt under sweep status.
[Max. Hold]
Menu description: to set the current trace processing method as maximum hold, i.e., the new trace data will be assigned with
maximum value of previous measured trace data.
[Min. Hold]
Menu description: to set the current trace processing method as minimum hold, i.e., the new trace data will be assigned with
minimum value of previous measured trace data.
[Blank]
Menu description: Clear all displayed traces. Trace save in register will not be deleted.
[View]
Menu description: Hold current trace and not refresh. Easy for checking.
[Trace Operation]
Menu description: to start up trace mathematical operation and set the methods and rules. The soft menus include [1<-->2],
[2-DL->2], [2<-->3], [1->3], [2->3].
[1<-->2]
Menu description: Exchange the data in trace register 1 and trace register 2 and display
