Saluki S3531 series, User Manual

Page: 49 / 71

Tel: 886.2.2175 2930 Email: sales@salukitec.com
www.salukitec.com
37
6.12 PEAK
The [Peak] key on the front panel. is used to turn on the peak search for traces by the control instrument and turn on marker for
display, including [Next Peak], [ Right Peak], [Left Peak], [Marker->CF], [Continuous Max ON OFF], [Min Search].

[Next Peak]
Menu description: Taking the Amplitude of the point where the current marker is located, search for the next peak of current
test trace.

[Right Peak]
Menu description: to search for the peak to the right of the current test trace marker position.

[Left Peak]
Menu description: to search for the peak to the left of the current test trace marker position.

[Marker → CF]
Menu description: to set the Center Frequency equal to the Marker Frequency. It can quickly move the signal to the center
position of the screen.

[Continuous Max On Off]
Menu description: when Continuous Max is ON, the current marker will perform one Peak Search after each sweep. If the
Continuous Peak Search is OFF, no operation is made.

[Min Search]
Menu description: to turn on the Min Search.