Tel: 886.2.2175 2930 Email: [email protected]
www.salukitec.com
41
6.16
Span
Press the [Span/X Axis] on the front panel to enable the span function and set the signal/spectrum analyzer into center
frequency/span mode. Press the [Span] key to pop up [Span], [Full Span], [Zero Span] and [Previous Span] at the same time.
[Span]
Menu description: the span can be set by number keys, stepping keys or knob. Use number keys or select [Zero Span] to set
the span as zero.
[Full Span]
Menu description: to set the signal/spectrum analyzer into the center frequency/span mode. Set the span as maximum value.
[Zero Span]
Menu description: to set span as 0Hz. It is good for observing signal at time domain, in particular, good for observation of
modulating signal.
[Last Span]
Menu description: to set the signal/spectrum analyzer back to the previous span.
