Tel: 886.2.2175 2930 Email: [email protected]
www.salukitec.com
10
4.1.2.2
Numeric Keyboard
Number 1 – 9
To input number parameters.
Decimal point
To inset one "." at cursor position.
“-“ key
To change s,-) of numeric parameters.
Backspace key
When alphanumeric character has been entered, this key will delete the character at the left of the cursor;
If no input field is active, this key will cancel recently entered value and restore the previous value. Therefore, users can switch
between two values (such as frequency span).
4.1.3
Enter key
To terminate the input of a dimensionless number and set it as a new value;
For other inputs, this key may be used as unit key including "Hz/dB";
4.1.4
Front Panel Interfaces
4.1.4.1
USB
Use for external storage, U disk
4.1.4.2
RF IN
RF IN port is a 50ohm N type female port. This port will be connected to a test cable or an antenna to collect signal to be tested.
