Tel: 886.2.2175 2930 Email: [email protected]
28
1)
The Main Menu
All setting can be found in the main menu.
2)
The Toolbar
3)
The Horizontal Panel
The user can change Time/Div, format in the panel.
4)
The vertical Panel
The user can turn on/off the CH1/CH2.Also the user can change the CH1/CH2 volt/div, coupling and probe
attenuation.
5)
The Trigger Panel
In this panel, the user can change the trigger mode, sweep, source and slope.
6)
Displays the system time.
7)
Battery Level.
8)
Time/Div.
9)
Sample Rate.
10)
Displays the CH2 information
Readout shows the coupling of the channels.
Readout shows the vertical scale factors of the channels.
A “B” icon indicates that the channel is bandwidth.
11)
Displays the CH1 information
1
3
4
2
5
6
7
8
9
10
11
12
13
14
15
18
17
16
