Tel: 886.2.2175 2930 Email: [email protected]
45
Do these steps:
1. Click “Cursor->Source”, select CH1 (select CH2 if you want trace CH2).
2. Click “Cursor->Type”, select Trace.
3. Click the cursor at the position that you want traced of the wave in the waveform window.
The Trace cursor display window:
The Trace cursor measure result display on status bar:
5)
Vertical
The Vertical cursors appear as vertical lines on the display and measure the vertical parameters.
Do these steps:
1. Click “Cursor”-> “Source” select CH1 (select CH2 if you want measure CH2).
2. Click “Cursor”-> “Type”, select Vertical.
3. Push left mouse button, and the vertical lines appear.
4. Drag the mouse button to the point you want to measure.
5. Release the left mouse button, the frequency and time difference will be shown at the status bar.
The Vertical cursor display window:
