Tel: 886.2.2175 2930 Email: [email protected]
46
The Vertical cursor measure result display on status bar:
6)
Horizontal
The Horizontal cursors appear as horizontal lines on the display and measure the horizontal parameters.
Do these steps:
1. Click “Cursor”-> “Source” select CH1 (select CH2 if you want measure CH2).
2. Click “Cursor”-> “Type”, select Horizontal.
3. Push left mouse button, and the Horizontal lines appear.
4. Drag the mouse button to the point you want to measure.
5. Release the left mouse button, the voltage difference will be shown at the status bar.
The Horizontal cursor display window:
