Tel: 886.2.2175 2930 Email: [email protected]
53
NOTE
：
Pass/Fall function is unavailable in X-Y mode and Roll mode.
4.16.3
Self Calibration
Please refer to
4.16.4
Factory Setup
Click “Factory Setup” in “Utility” menu to load default setups.
When you click the Factory Setup in Utility menu, the oscilloscope displays the CH1 and CH2 waveforms and
removes all other waveforms.
The oscilloscope set up for normal operation when it is shipped from the factory and can be recalled at any time by
user.
The Factory Setup function does not reset the following settings:
Language option
Date and time
4.16.5
Language
Click “Language” in “Utility” menu.
There are two languages in “Language” menu. The default language is English.
