Tel: 886.2.2175 2930 Email: [email protected]
56
5.1
User Interface
The user’s interface:
1)
Channel information and Volt/Div
: CH1 is selected.
: CH2 is selected.
If the channel is select, you can see yellow background of CH1 or blue background of CH2.
2)
Time/DIV: lead the setting of the time base parameters
Select the time setting for the beam to sweep one major division on the screen. By selecting different time/div
settings it is possible to zoom in on the frozen waveform on the screen.
3)
Battery level
4)
Trigger State
5)
Function menu
RUN: Run the application. Tap RUN menu again to stop it.
AUTO: Automatically set the oscilloscope controls to generate a usable display of the input signals. Refer to the
following table for relative content.
A signal is triggerred and trigger source is CH1.
A signal is not triggerred and trigger source is
A signal is triggerred and trigger source is CH2.
A signal is not triggerred and trigger source is
