Tel: 886.2.2175 2930 Email: [email protected]
43
Click “Display->Wave Color” in main menu.
The following figure shows the waveform color dialog. It shows the waveform color setting.
If you click the color rectangle, the color dialog will be showed:
4.13
Measure System
The oscilloscope displays graphs of voltage versus time and can help to measure the displayed waveform. There are
several ways to take measurements, using the graticule, cursor measurement or performing an automatic
measurement.
4.13.1
Scale measurement
Graticule: This method allows you to make a quick, visual estimate and take a simple measurement through the
graticule divisions and the scale factor.
For example, you can take simple measurements by counting the major and minor graticule divisions involved and
multiplying by the scale factor. If you counted 6 major vertical graticule divisions between the minimum and maximum
values of a waveform and knew you had a scale factor of 50mV/division, you could easily calculate your peak-to-
peak voltage as follows:
6 divisions x 50mV/division = 300mV.
