Document Reference: ENG-UMAN-000731
Revision: 5.00
Page 52 of 61
13
Patient ID Card
Every CLS is supplied with a Patient ID Card for the surgeon to complete.
Give the completed Patient ID Card to the patient so that they can use it to show
other medical practitioners or security personnel that they have an implanted
device.
14
Maintenance of the Evoke CI and Evoke CST
14.1
Maintenance of the Evoke CI
Maintenance of the Clinical Interface should be carried out according to instructions in the
Surface Pro 4 manual accessible at
https://www.microsoft.com/surface/en-
au/support/browse/surface-pro-4
14.2
Updating the Evoke CI Software
The CI contains software (Kaseya) that automatically checks if there are any updates that can be
downloaded and applied to the CI. The CI must be connected to the internet for this check and
update to be completed.
When the Kaseya software detects that an update is required it will show the following message:
Figure 14.1: Prompt message for software update
Touch “Yes” to download and apply the updates now, or “No” if you wish to update later.
Note: The update should be applied as soon as possible, but if there is not sufficient time the
software will continue to popup reminders until the update is applied.
The update process will take several minutes during which you will be unable to use the
programs. You will receive a message once the update for each program is complete.
