Evoke
®
SCS System Clinical Manual
CLIN-UMAN-005175
Revision: 9.00
Page 82 of 101
3.
The Evoke System has not been tested for MRI compatibility and is MR unsafe. The
Patient ID card indicates that the patient
must not
undergo an MRI scan with the
Evoke System implanted.
16
Maintenance of the Evoke CI and Evoke CST
16.1
Maintenance of the Evoke CI
Maintenance and cleaning of the Clinical Interface should be carried out according to
instructions in the device manual accompanying the CI tablet.
16.2
Maintenance of the Evoke CST
The CST is not expected to be in direct contact with patients but should still be periodically
cleaned. The CST can be cleaned with a soft cloth dampened with a mild disinfectant or alcohol.
Refer to the Evoke SCS System User Manual for advice on the maintenance of additional
components of the Evoke SCS System.
16.3
Updating the Evoke CI Software
The CI contains software that automatically checks if there are any updates that can be
downloaded and applied to the CI. The CI must be connected to the internet for this check and
update to be completed.
When the software detects that an update is required it will show the following message:
Figure 16.1:
Prompt message for software update.
Touch “Yes” to download and apply the updates now, or “No” if you wish to update later.
Note:
The update should be applied as soon as possible, but if there is not sufficient
time the software will continue to popup reminders until the update is applied.
The update process will take several minutes during which you will be unable to use the
programs. You will receive a message once the update for each program is complete.