48
| EN
AMBERAIR COMPACT CX V v2019.04
7.7.2. HEAT EXCHANGER MAINTENANCE AMBERAIR COMPACT 6-7 CX V
•
Remove the by-pass damper only after removing from the product the upper damper (information provided above). Unscrew the screws and
remove the front vertical beam. Unscrew the screws holding the bypass valve (with fingers).
•
Unscrew the screws holding the heat exchangers and the parts sealing the by-pass damper (4 pcs). It can be done using a broad flat screwdriver
or a 2-eurocent coin.
•
Slightly lift (direction 1) the part sealing the heat exchangers and withdraw it from the partition (direction 2), and it will unbind from the screw
situated father. Remove (direction 3) the part sealing the heat exchangers. Remove all the four parts sealing the heat exchangers in a similar
manner. Then the by-pass damper and the heat exchangers can be removed from the product.
• The installation of the by-pass damper and the heat exchanger in the reverse order.
360
o
360
o
360
o
360
o
