EN |
35
AMBERAIR COMPACT CX V v2019.04
0-10V (PWM) valve control
●
●
Water cooler circulation pump control
●
●
Water cooler operation switching (cooling/heating)
○
○
Filters clogging monitoring
Air filter protection according to pressure relays
●
●
Air filters timer
●
●
Fire alarm damper
Fire valves control (on/off)
●
●
Fire valves testing
●
●
DX cooler
On/off (PWM) and 0-10V control
●
●
DX cooler breakdown indication (NC)
●
●
DX cooler operation switching (NO – cooling; NC – heating)
●
●
Recirculation
3P and 0-10V (PWM) valve control
●
●
Recirculation stepped motor control
●
●
Bypass damper
3P and 0-10V (PWM) damper control
●
●
Bypass damper stepped motor control
●
●
Remote controllers
S-Touch
x
x
FLEX MCB
x
x
MB Gateway
x
x
○ – Required additional components: CO
2
and moisture sensors, switches, etc.
● - standard feature (the number of features depends on the ventilation unit in which the automatics are used); to be configured through BMS
network or remote control console
x - Remote control consoles
*The possibility to connect either a water or electrical pre-heater
6.4. DESCRIPTION OF THE UNITS FUNCTIONS
All functions indicated in this section are installed in the software of the control board. However, operation and control of the device depends on
the following:
1.
Selected control panel. Full functionality and configuration possibility can be assured only by MB-Gateway web interface SA-Control, SALDA
AIR app.
2.
Connected external devices: external heaters, dampers, sensors and etc. (see the description of the acquired air handling system).
3.
Internal components of the device: type of heat exchanger (plate or rotor), integrated dampers, sensors and etc. (see components of the
chosen device).
4. Control board type.
Air Handling Unit uses MCB board.
The unit can be configured only with SA-Control remote con trol panel, MB-Gateway web application or SALDA AIR app.
The following control board functions can be fully con trolled only with SA-Control remote con trol panel, MB-Gateway
web application or SALDA AIR app. In case of Stouch remote con trol panel use the description of remote control panel
functions for MCB control board.
6.4.1. SYSTEM MODES
• Stand-by;
• Building protection;
• Economy;
• Comfort.
In Stand-by mode the system is shut down for a permissible period (based on the Stand-by mode blocking function settings).
