SAKI BF-Sirius, Manual

Page: 23 / 72

I- 17
BF-Sirius
Operation Manual
3.5 Loading / Unloading a PCB
3.5.1 Guide Width Adjustment Method
The below operation needs to be done when you inspect the different size of PCBs.
Loosen the clamp lever. Step1:
Sub Backup Pin
Clamp Lever
Clamp Lever FFFure 3-24
Put the PCB close against front side of the guide rail. Step2:
Adjust the rail width and fix the clamp lever. Step3:
CAUTION When you inspect large PCB, support PCB using sub backup pin. Sub backup pin
set position without components.
3.5.2 PCB Loading / Unloading Method
Put the PCB close against front side of the guide rail and carefully put the other side of the PCB on
the back side of the guide rail. Position the PCB leaning the PCB to the stopper on the right side and
also to the guide rail to the front side.