SAKI BF-Sirius, Manual

Page: 62 / 72

BF-Sirius
Installation Manual
III- 2
1 Machine Installation
This chapter describes an installation procedures.
WARNING
Check that the outlet FG terminal at the factory equipment is properly grounded at the installation.
1.1 Tools Required in the Installation Process
These are commonly used tools that should be on hand for installation.
These tools will also be required during machine maintenance or adjustment.
Item Usage Purpose and Description
Hex Wrench
For attaching and detaching external covers, attaching
internal parts, and performing adjustments.
Phillips Screw
Driver No.2
No.1
Tools Required in the Installation Process T a bl e 1-1
1.2 Unpacking and Installing the Machine
1.2.1 Items to be Verified at Unpacking
Before starting installation, check the items.
If any damaged or missing items are found, please contact Saki Corporation.
No. Item Qty.
1 Inpsection Machine 1
2 19-inch LCD Monitor 1
3 PC 1
4 Keyboard 1
5 Mouse 1
6 Mouse Pad 1
7 Power Supply Cord 1
8 Power Supply Cord for the System 2
9 Manual(This Manual and Programming) 1 each
10 System Backup Disc 1
11 Shading Sheet(Spare) 1
12 Backup Soft [Norton Ghost] 1
13 Fixing Plate(Scan table is secured by this plate before Shipment) 1
14 Wiring Cable
RS-232C Cable 1
Camera Link Cable(3 m) 2
DVI Cable 1
DisplayPort-DVI Conversion Cable 1
Items to be Checked at Unpacking T a bl e 1-2
NOTE The Commercially available softwares are subject to change without notice.