SAKI BF-Sirius, Manual

Page: 26 / 72

I- 20
BF-Sirius
Operation Manual
3.8 Manual Mode
3.8.1 Operation Procedure of Manual Mode
In Manual Mode, all operations are done by an operator.
All operations are required by manually clicking on the menu-bar except for the result output.
Scan, Inspect FFFure 3-2 8
Step Process Manual Mode
1
Loading the PCB Load the PCB manually.
2
Scanning Press Scan button on the tool-bar or select Scan from the menu-bar.
3
Inspection Press Inspect button on the tool-bar or select Inspect from the menu-bar.
4
Result output
↓
5
Unloading the PCB Unload the PCB manually.
Operation Procedure in Manual Mode T a bl e 3-1
3.8.2 Inspection Method of Manual Mode
Select a data according to Step1: 3.4 Select Inspection Data .
Put a PCB to inspect on the scan table. Step2:
Press Step3: Scan button on the tool-bar or select Scan from the menu-bar.
After the PCB image is displayed on the window, check the image display for distortion or Step4:
tilt. If the image is distorted or tilted, please contact Saki Corporation.
Press Step5: Inspect button on the tool-bar or select Inspect from the menu-bar.
Inspection result is displayed in the upper side of the index flame. If the inspection result is Step6:
OK, OK is displayed in green. If defect is detected, NG is displayed in red.
Unload the PCB in the machine. Step7: