Sakai SW300-1, Shop Manual

Page: 177 / 246

9-013
INSPECTION AND ADJUSTMENT
8-1-2. TW types: rear
• Oil temperature during measurement : 50
± 5
°C (122
± 41
°F)
① Disconnect hose (2) and (3) from propulsion motor. Attach
pressure gauge through adapter
ⓝ
.
• Adapter ⓝ : G3/8
• Pressure gauge : 0 to 5 MPa (0 to 725 psi)
② Start the engine and set throttle lever to “Full”.
③
Establish a condition in which machine propulsion load
becomes maximum. (Pressure does not build up unless
propulsion load is applied.)
④ With propulsion load at maximum, measure pressure
when F-R lever is in “N”, “F”, and “R”, respectively.
★
Motor case pressure : 0.3 MPa (43.5 psi) or less
SW300-1-09018
2
Left side
SW300-1-09019
3
Right side
PG002003
n
09̲INSPECTION̲AND̲ADJUSTMENT.indd 9-013 09̲INSPECTION̲AND̲ADJUSTMENT.indd 9-013 2012/11/14 20:03:05 2012/11/14 20:03:05