Sakai SV201-1, Shop Manual

Page: 173 / 238

8-019
INSPECTION AND ADJUSTMENT
12-2. Adjustment after Manual Release of Brake
①
Remove bolt (25), nut (24), and seal washer (26).
②
Replace seal washer (26) with a new one.
③
Apply grease to bolt (25) threads.
④
As shown on the right, install bolt (25), nut (24), and seal
washer (26).
⑤
Adjust bolt (25) to the dimensions as shown on the right.
Similarly, adjust the bolt on the opposite side.
Specified dimension a : 30 + 0.5 mm (1.18 + 0.02 in.)
⑥
Tighten nut (24), and firmly secure bolt (25).
When tightening nut (24), make sure that bolt (25)
does not move. After securing bolt, check the
dimensions of bolt again.
•
★
★
SV510-
ޓ
-08030
24
25
26
SV510-
ޓ
-08030
24
25
26
SV510-
ޓ
-08031
a
SV510-
ޓ
-08031
a
0 0 0 0
SV510-
ޓ
-08032
24
SV510-
ޓ
-08032
24