Sakai SV201-1, Shop Manual

Page: 47 / 238

3-006
ENGINE AND CONTROLS
3-1-1. Installation of pump
When the pump has been removed from the engine for
repair or replacement, reinstall it in accordance with the
following procedure.
①
Set sunk key (10) to propulsion pump (2) shaft.
②
Secure hub (13) with nut (12) and washer (11).
N•m
(12) Nut 3/4-16UNF : 196 N·m (146 lbf·ft)
③
Secure flange (14) to engine flywheel with eight bolts (1).
N•m
(1) Bolt M10×25 P=1.25 : 69 N·m (51 lbf·ft)
④
Secure housing (8) to engine flywheel with twelve bolts (9).
N•m
(9) Bolt M10×25 P=1.25 : 69 N·m (51 lbf·ft)
⑤
Apply grease to hub (13) and flange (14) splines.
⑥
Set spacer (7) on housing (8).
⑦
Engage hub (13) and flange (14) splines.
⑧
Secure propulsion pump to housing (8) with two bolts (3),
spring washers and washers.
N•m
(3) Bolt M12×45 : 78 N·m (56 lbf·ft)
(NOTICE)
Bolt (1) is treated with thread-locking fluid. Use new
thread-locking fluid treated bolts for installation.
•
•
SV201-1-03001
1 2
3
9
7
8
11
10
12
13
14
SV201-1-03001
1 2
3
9
7
8
11
10
12
13
14