Sakai SV201-1, Shop Manual

Page: 104 / 238

6-006
VIBRATORY DRUM • REAR AXLE
2-1-2. Installation of vibratory drum
1) Install vibratory drum in the reverse order in which it was
removed.
Tightening torque for bolts where particular care is
required when installing vibratory drum.
N•m
(2) Bolts M12×70 : 108 N·m (80 lbf·ft)
(Vibratory drum)
(3) Bolts M20×100 : 539 N·m (398 lbf·ft)
(Cross member)
2) Upon installing vibratory drum, pay particular attention to
items mentioned below.
Fill hydraulic oil tank to specified level to make up for any
oil leakage.
Start engine and circulate oil through piping. Then check
oil level again, ensuring that the oil is at specified level.
(NOTICE)
If the engine is run at high speed or the cylinder is
operated to full stroke when the engine is started
for the first time after the work is completed, the
piston packing or other items may be damaged by air
entering into the cylinder.
•
•
•
•