Sakai SV201-1, Shop Manual

Page: 101 / 238

6-003
VIBRATORY DRUM • REAR AXLE
2. VIBRATORY DRUM
2-1. Removal and Installation of Vibratory Drum
2-1-1. Removal of vibratory drum
1) Joint front frame and rear frame with lock pin (1).
WARNING
When lifting the machine body, use an appropriate hoist
of sufficient strength. Confirm that the surrounding area
is safe, and work in a natural, unstrained posture.
Also, to firmly secure the machine body, use a support
stand of sufficient strength.
2) Lift rear frame with a crane.
Firmly secure machine body by placing support stands
and/or wooden blocks at rear end of rear frame.
(NOTICE)
Do not allow rear wheel tires to leave the ground. (The
tires must support the machine’s body weight, too.)
Rear axle weight
SV201D
-1
: 2,200 kg (4,850 lbs.)
SV201T
-1
: 2,200 kg (4,850 lbs.)
SV201TF
-1
: 2,200 kg (4,850 lbs.)
SV201TB
-1
: 2,150 kg (4,740 lbs.)
3) Lift front frame with a crane.
Ensuring that no load is applied to eight bolts (2) (left and
right sides), place support stands at right and left sides of
front frame. Firmly secure machine body.
Front axle weight
SV201D
-1
: 2,150 kg (4,740 lbs.)
SV201T
-1
: 2,250 kg (4,960 lbs.)
SV201TF
-1
: 3,000 kg (6,615 lbs.)
SV201TB
-1
: 2,600 kg (5,730 lbs.)
•
•
•
SV201-1-06001
1
SV201-1-06001
1
SV201-1-06002
Wooden block
Support stand
Lift with crane.
SV201-1-06002
Wooden block
Support stand
Lift with crane.
SV201-1-06003
Lift with crane.
Support stand
2
SV201-1-06003
Lift with crane.
Support stand
2