Sakai GW75O Operating & Maintenance Instructions Download

Page: 37 / 76

2. OPERATION

2.3.4 Traveling

CAUTION

While travelling, do not turn the starter switch OFF.

WARNING ____________________________

When starting, operate the horn after securing the
safety around the machine. Clear away obstacles
on the road.

)1 2nd

1) Select the desired speed by the operation of speed shift lever.

3rd

Speed shift lever

1st

2nd

3rd

Travel speed

0-3 km/h (0-1.9 mile/h) 0-5 km/h (0-3.1 mile/h)

0-9 km/h (0-5.6 mile/h)

WARNING

On a steep slope, run the machine at low speed. Do
not attempt to shift speed while travelling.

Idling

Full throttle

2) Speed up the engine by pulling the throttle lever

towards you.

3) Press down parking brake switch button to release the

brake. Check that indicator lamp _ on the monitor
display goes off.

Released

—

Applied

—

1st

—

Summary of Contents for GW75O













































































Search results

Summary of Contents for GW75O

Reviews:

Related manuals for GW75O

Brands by name

Popular brands

Sakai GW75O, Operating & Maintenance Instructions

Search results

Summary of Contents for GW75O

Reviews:

Related manuals for GW75O

Brands by name

Popular brands