2.
OPERATION
Horn
switch
Pressing the button at the center of the steering wheel
makes the horn sound.
Vibrator switch
Turns on/off vibration ON-OFF and changes vibration
amplitude.
S wi t ch in g f ro m 1 to 4 ca u se s vib r a t io n a t h i gh e r
OFF
- 4
amplitude.
Vibration 1 operates even in stop state if the engine
speed is 1,800rpm or higher, but vibration 2 to 4 operates
only while moving forward or backward.
When the forward-reverse lever is placed in the neutral position during rolling compaction
work at vibration 2 to 4, return is made to the amplitude of vibration 1. Tilting the lever again
resets the amplitude to the selected one of 2 to 4.
At vibration 1, the vibration indicator lamp on the left side lights and at 2 to 4, two indicator
lamps, right and left, light.
NOTE:
The vibration rolling compaction should be made at 1,800rpm or higher of the engine
speed.
•
Avoid long-time vibration at vibration 1 while the machine stops.
•
If traveling becomes impossible due to mud, etc. during vibration rolling,
compaction, immediately stop vibration.
•
Because of the characteristic of the amplitude selector system, switching
to
y
lower amplitude such as from 4 to 3 or from 3 to 2 cannot be sensed, and in order
to switch to lower amplitude, therefore, turn the amplitude selector switch to
"OFF" once, and then select the amplitude again.
The vibrator switch mounted on the F-R lever also shuts off
vibration.
2 1
-
2 3 -
