SAINT-GOBAIN Norton Clipper CM 401 Series, Operating Instructions Manual

Page: 23 / 30

VERS. 2017.06.12 CM 401_MAN_EN
23
Lubrication
The CM 401 uses life-
lubricated bearings. Therefore, you don’t need to lubricate the machine at all.
Adjustment and replacement of the belts
To adjust the belts, firstly remove the belt guard by unscrewing the 4 nuts. Loose the 4 motor bolts
and shift the motor by using the two screws on the side. To replace the belts, move the motor forward
on the cutting head. Adjust the belts and retighten them by shifting the motor to the rear of the
machine. Always use a matched set of belts. Do not replace single belts.