SAINT-GOBAIN Norton Clipper CM 401 Series, Operating Instructions Manual

Page: 11 / 30

VERS. 2017.06.12 CM 401_MAN_EN
11
Leroy-Somer motor with 2,2kW. Low voltage trigger (NVR) built in the switch prevents the motor to
restart for example after a power cut.
The electric motor has an overload protection. Thermal overload tripping can occur for two reasons:
a. tripping under light load
If connection is incorrect
b. tripping under heavy load
If motor has been overloaded
Anti-tipping device (9)
Two sheaves located on each side of the conveyor cart stabilise the cart while its usage. It also
prevents the cart from tipping from the frame.
Blocking device (10)
The cart can be fixed on the frame to allow the machine to be transported without danger.
2.4 Technical Data