SAINT-GOBAIN Norton Clipper CM 401 Series, Operating Instructions Manual

Page: 17 / 30

VERS. 2017.06.12 CM 401_MAN_EN
17
4
TRANSPORT AND STORING
4.1 Securing for transport
Before transporting or lifting the machine, always remove the blade and empty the water pan. You
can transport the machine mounted, or you can remove some parts from the machine so it is lighter.
Picture 1 : Securing the conveyor cart Picture 2 : Securing the water pan
a) If you want to transport the machine mounted, you have to secure the conveyor cart and the water
pan:

To secure the cart (picture 1), loosen the wing nut (1) and turn the blocking device until it takes
the screw (3). Then retighten the wing nut.

To secure the water pan (picture 2), make sure the blocking device (1) is in the shown position.
b) You can also remove the conveyor cart and the water pan:

To remove the cart, loosen the wing nut (1 on picture 1) and turn the blocking device until it is
parallel to the scale. Loosen the knobs on each side of the conveyor cart (1 on picture 3), and put
the anti-tipping device in its lower position. Then remove the cart.

Before removing the pan, take the water pump out of it. Open the blocking device (1 on picture 2)
and pull the pan out of the profiles.
Picture 3 : unlocking of the anti-tipping device