SainSmart Genmitsu PROVerXL 4030, User Manual

Page: 29 / 39

28
3.5 Final Checks
The Axis leadscrews are lubricated at the factory; however, we recommend you inspect drive screws and
reapply if needed. It is suggested you use a “Dry” PTFE based lubricant or similar product (not included)
to help prevent debris and dust from sticking to the rods or leadscrews.
Please Note: Recommended normal maintenance includes cleaning of the threaded rods and lubricating
as needed.
Ensure cables connecting the Z Axis and Spindle are not obstructed and mill move freely along the Z and
X axis. Check limit switch connections and all motors.
Verify the PROVerXL Control Box voltage switch is on the proper voltage for your region, default setting is 110V.
Before powering on your machine ensure the Emergency Stop Button is in the released position by turning
the button in the direction of the arrows and letting it spring out.
Lubricate
the Axes
Check
Cables and
Connections
Emergency
Stop Button