SainSmart Genmitsu PROVerXL 4030, User Manual

Page: 19 / 39

18
2.5 Finishing Frame Assembly
What you will need
36 37
(8) 5mm
Spring Washer
(8) 5mm
Flat Washer
29
(8) M5 x 16mm
Socket Cap Screw
Step 1:
Position the X-Axis gantry onto the Y-Axis carriage mounts
as shown in the diagram. Each carriage has an acrylic plate that will
hold the gantry at the appropriate height. Install the gantry using a
5mm washer, 5mm spring washer then M5 x 16mm screw as shown
in the diagram.
Step 2:
Secure the opposite side to complete the
installation.
Step 3:
Rotate both wheels on your Y-Axis stepper
motors to ensure smooth movement of the X-Axis
Gantry along the Y-Axis.
22
Allen Wrench