SainSmart Genmitsu PROVerXL 4030, User Manual

Page: 13 / 39

12
2.2 Finishing your Base Assembly
What you will need
MDF Spoil board 12
30
(6) M5 x 20mm
Socket Cap Screw
Y-Axis Base Assembly
2
Step 1: Position the MDF Spoilboard on the PROVerXL 4030
Base and align with the screw holes at the front and back
of the machine. Be sure the board is right side up (Threaded
Inserts should be towards the bottom, if you install it in
reverse the mounting screws will protrude from the top
of the spoil board). Tighten with M5 x 20mm Screws.
Step 2: Align each Dust Baffle to the side of the spoil
board, align with the screw holes and tighten down with
the M5 x 16mm screws.
29
(4) M5 x 16mm
Socket Cap Screw
(2) Dust Baffle 5 22 Allen Wrench